Homeowner Builder / GC
(781) 492-6671 Get a quote

New siding built for Massachusetts winters

We strip your walls down, fix what's rotten, wrap them tight and hang siding that sheds wind-driven rain for decades. You get a written estimate before anything gets torn off.

Get my free quoteCall (781) 492-6671
4Ever siding work in Massachusetts

Most siding problems in Massachusetts start behind the panels. Water gets past a lap, sits on the sheathing through a freeze-thaw cycle, and a few winters later you've got soft wood around a window. New siding can't fix that if it goes on over a wall nobody looked at. That's why we open your walls up first and check what's actually there.

Before any panel goes up, your substrate gets inspected and photographed. Bad sheathing comes out. DuPont Tyvek HomeWrap goes on with every seam and lap taped and sealed. Every window and door gets flashed so water heads back out instead of in. Then we fasten the siding exactly the way the manufacturer manual calls for, with the right clearances at the roof, deck and grade.

You pick the material that fits your house and your budget. Gentek vinyl, with premium colors at no upcharge. James Hardie fiber cement. Engineered wood and composite. Metal and aluminum panel for a modern or commercial look. We've done 300+ exterior remodels and 162+ new construction projects, and every install is backed by our 5 year workmanship warranty.

What we install

  • Gentek vinyl siding, premium colors at no upcharge
  • James Hardie fiber cement lap and shake
  • Engineered wood and composite siding
  • Metal and aluminum panel siding
  • White aluminum fascia wrap with vinyl soffit
  • DuPont Tyvek HomeWrap with taped and sealed seams
  • Continuous rigid insulation upgrade

Pick the job you actually have

Each one gets its own written scope. If your house needs more than one, we sequence them so nothing gets torn up twice.

Vinyl Siding

Gentek vinyl siding hung over a taped Tyvek wrap, with premium colors at no upcharge and a 5 year workmanship warranty.

See details

Fiber Cement Siding

James Hardie fiber cement lap and shake siding, cut and fastened per the manual for a solid, long-lasting finish.

See details

Engineered Wood Siding

Engineered wood and composite siding for the warm look of real wood, sealed tight against Massachusetts moisture.

See details

Metal Siding

Metal and aluminum panel siding for clean modern lines on homes, additions and commercial buildings across New England.

See details

Soffit and Fascia

White aluminum fascia wrap and new vinyl soffit, with your attic ventilation kept open and every corner sealed.

See details

Board and Batten Siding

Vertical board and batten siding in vinyl or James Hardie fiber cement, set over solid nailing and a taped Tyvek wrap.

See details

Dutch Lap Siding

Dutch lap vinyl siding with a deep cove at the top of each course, hung loose and level over a taped Tyvek wrap.

See details

Shake and Shingle Siding

Shake and shingle siding in vinyl or James Hardie fiber cement, for full walls or accent gables, flashed and taped behind.

See details

Insulated Vinyl Siding

Vinyl siding with rigid foam bonded to the back, for stiffer, flatter walls and a bit more insulation over your studs.

See details

PVC Exterior Trim

Cellular PVC trim boards for corners, casings, rakes and fascia that won't rot, fastened and glued to handle summer heat.

See details

Aluminum Trim Wrap

Custom-bent aluminum coil wrap for fascia, rakes, window casings and sills, so your trim never needs paint again.

See details

Fiber Cement Trim

James Hardie fiber cement trim for corners, casings and bands, installed with the clearances the manual calls for.

See details

Why our siding work holds up

01

We look before we cover

Your sheathing gets inspected and photographed before a single panel goes on. If something's rotten, you see it and we fix it, so it doesn't stay buried under new siding.

02

Every opening is flashed

Windows and doors are where wind-driven rain gets in during a nor'easter. We flash each one so water is pushed back out to the face of your wall.

03

Fastened by the manual

Nail spacing, clearances and expansion gaps follow the manufacturer's install manual. That keeps your material warranty intact and stops panels from buckling when temperatures swing.

04

We stand behind the work

If anything we installed fails because of how we installed it, we come back and correct it at no cost for 5 years. Manufacturer material warranties pass straight to you.

5 years on our work. In writing.

If something fails because of how we installed it, we come back and fix it at no cost. Manufacturer warranties pass straight to you.

How the warranty works

Questions about siding

Should I replace my siding or just repair a few spots?

If the damage is limited to a few cracked or loose panels and the wall behind them is dry, a repair can make sense. Once you see soft sheathing, swelling around windows, or several elevations showing wear, patching just moves the problem around. We'll show you photos of what we find and tell you straight which one fits your house.

Can you install new siding over my old siding?

We'd rather not. A lot of 1920s to 1950s homes around here have old cedar shingle or asbestos siding sitting under a layer of vinyl. Covering it again hides rot and makes it hard to get a flat, properly flashed wall. On a free estimate we'll check what's under yours and explain your options, including how asbestos siding needs to be handled.

How long does a siding job take?

It depends on the size of your house, the material, and how much repair the walls need once they're open. Our Framingham fiber cement re-side with shake detail was finished in four business days. Your written estimate includes a schedule, and you'll get a written start window before work begins.

What changes the cost of new siding?

The big ones are the material you choose, the square footage of your walls, how many windows and doors need trim and flashing, and how much damaged sheathing turns up during tear-off. Trim details like shake gables, fascia wrap and soffit add to it too. We measure everything in person and put it all in a written estimate.

What goes under the siding?

On every job we inspect the sheathing, replace anything that's rotten, then wrap your walls in DuPont Tyvek HomeWrap with taped and sealed seams. Every window and door is flashed. If you want better energy performance, we can add continuous rigid insulation before the siding goes on.

Brazilian roots.New England weather.

4Ever has Brazilian roots. The jaguar, the biggest cat in the Americas, carries that origin onto every truck, shirt and yard sign. Yellow is its coat. Black is its spots.

It stands for what we want on every wall we close: strength that holds for decades and precision you can check with a level.

  • StrengthMaterials and fastening that last decades.
  • PrecisionMeasured, flashed, taped and sealed.
  • ResilienceBuilt for wind, snow and freeze thaw.
  • TrustWritten scope and insured crews.
  • BrazilWhere the jaguar comes from.

Build your quote.Start a bid.

Four quick steps. A real person from our office calls you back.

Who is this for?
What do you need?

Pick as many as you want. Looking for work? See jobs on our crews.

Tell us about the building.

How tall is it?

When do you want to start?

Where do we call you?

By sending this you agree that 4Ever Exteriors may call, text or email you about your project. No spam, no sharing your number.

New England colonial home with charcoal siding, white trim and a composite deck at sunset Multifamily building in progress with 4Ever crews on site

Get a written quotewith every itemspelled out.

Send the drawings.Get unit pricingback, line by line.

Start my quoteRequest a bid (781) 492-6671
Call Free quoteRequest a bid